Most of our sharp tools are made from carbon steel - this means they may, through regular use, stain (and eventually rust) and gradually lose their edge. Caring for them involves three things…
1. Correct Use:
- Japanese steel is hard and sharp, and can be more brittle than some people are used to - it will chip if abused
- Do not cut wire, metal, stone, plastic or any other hard material (even bamboo fibres and some very hard woods, especially knots and burrs, can damage steel edges)
- Do not twist or apply uneven pressure
- Cut diagonally across branches (not straight across) so you cut along the fibres
- Pay attention to our maximum cut dimensions, and don’t overdo it (shears are not loppers)
- Use the base of the blades, not the tips, for heavier cuts
2. Keeping Them Clean:
- Remove leaf resin, rust and gunk with a Clean Mate and water
- Dry, wipe over with Camellia oil and store in a dry place
3. Keeping Them Sharp:
New tools won’t need sharpening for some time, but after a while you’ll notice them gradually lose their edge, especially if you’re box clipping (you need REALLY sharp blades to get a good finish with box). Use the Niwaki Sharpening Stones for best results (#1000 grit is best for general sharpening).
- Sharpen Secateurs every couple of weeks
- Sharpen Shears and Topiary Clippers EVERY TIME you use them - the difference is amazing
- Free delivery for orders over £100* with Royal Mail Tracked 48
- £4.00: Standard service via Royal Mail Tracked 48, typically 2-5 working days.
- £7.50: Priority service via Royal Mail Tracked 24, DHL, FedEx, or UPS; typically delivered next working day by 6pm (excluding Sat/Sun and UK Bank Holidays) for orders received before 12pm GMT Mon–Fri (excluding UK Bank Holidays).
*Surcharges may apply to some larger or heavier items to some areas.
Through regular use, Secateurs and Topiary Clippers can work a bit loose. Tightening them is straightforward but there’s a knack…
- Loosen the hexagonal nut (it’s a locking nut, so you don’t tighten it to tighten the play of the secateurs)
- Undo the bolt, and clean the separate parts - a great opportunity to sharpen them really well
- Rescrew the bolt, and tighten to what feels right. This is how you adjust the play, with the bolt, not the nut
- Put the locking nut back on
In theory it’s easy but in practice quite tricky, as the nut can seize up - be sure not to slip and scuff it (or your knuckles) with the spanner. If it seems too daunting, select the Sharpening Service and we’ll sort them out for you.
